We all are dependent on WiFi for consumption of hundreds of videos, photos and even for work. WiFi Technology gives us the freedom to access internet sitting anywhere within the range which hundred times better than confined by a fiber optic cable that defines is a range. No matter what provider you pick and what service pack you choose, sometimes or another, you will come across what we know WiFi issues. Is your WiFi working slower than earlier or is the network poor? There are numerous reasons why this could have occurred like your position is obstructed by think walls or the router may not be calibrated properly or the most common issue, the signal is poor which makes the internet slow. Since we live in

It is a well known that we don’t like anything which is slow, like WiFi. Therefore you can either switch to and different service provider which is not the case usually. The alternative is to give a boost to the WiFi signal that will optimize its speed within the range of its connection. What are you waiting for? Read along to how you can boost the poor wifi signal to obtain greater latency and speed.

How To Boost WiFi Signal On Android Phone?

Tip #1 – Change the frequency band

If the signal is poor, change in the frequency band won’t improve it, is it so? WiFi uses signals propagating in the electromagnetic spectrum. Since most of the devices use the conventional 2.4Ghz band, it is clutter by numerous that use this band. With the availability of just 14 channels in the 20Mhz frequency, you will get a poor signal with lots of people in the same space. Opting for 5Ghz frequency bands opens up a large space in the electromagnetic spectrum which has a lot of space to accommodate countless devices without any adverse and poor signal strength. This band has 23Mhz frequencies for use thus improving the strength of wifi signal that you have been wanting for so long.

Most of the modern devices and routers have 5Ghz frequency band as default. If not, you can alter the band on your router using the admin page. You can tweak and set the said frequency band as default by following the steps mentioned below.

  • Visit Settings on your phone.
  • Next is to proceed towards WiFi option.
  • Click on Advanced settings and scroll then page and tap on WiFi Frequency Band to 5Ghz.

Hopefully, this method will boost the strength of the WiFi signal that you have been complaining about. You can try other methods in the extract to get a boost.

Tip #2 – Track Your WiFi Signal

A router sends signals to a fixed distance, however, with the obstructions such as walls or other less penetrable structure, the signal can be weak. If you are observing a weak network and wander into the house to find a perfect spot for strong Wi-Fi signal, why not do it the right way. Instead of searching for the suitable spots where the signals are strong, you can do it with the help of particular apps. Wi-Fi Signal Booster is an app that traces the availability of network and the network you are currently using which is depicted by Yellow and Red color respectively. Roam around the place for a bit and stop wherever the two lines are at the closest as this spot will give you strongest network. Now that you have found the best hot spot in the house or office, you can work without worrying about poor connection.

Tip #3 – Avoid Poor Connections

Out of all the network connections available when you try to find a Wi-Fi network on your android phone, skip those with poor or bad quality network. Although this can be done manually, you can set the settings on your phone that will avoid detecting any poor connections will require. When enabled, it will only show networks that have good quality and strong network.

  • To Enable it, go to ‘Settings’ on your phone.
  • Tap on the ‘Wi-Fi’ option the screen.
  • Now, click on the three vertical dots on the right bottom side of the screen and hit on ‘Advanced’ feature.
  • Scroll and locate the tick box ‘Avoid poor connections’ and tick it.
  • Now, scan the available networks and connect to those with the only strong network.

Tip #4 – Update The Firmware

If poor Wi-Fi connecting is hindering you, outdated firmware can be a reason. For devices which are currently running on original ROM and unrooted, they will be able to download and install the firmware updates sent OTA. They can check the updates if available at ‘Settings > About Phone > System (Software) Update’. For those who are using custom ROMs on their phone, you’ll have to update the system manually frequently to stay updated. For this, you can download the bootloader and radio for your device online.

Tip #5 – Check If The WiFi Is Blocked Or Not

Walls are known to distribute a fraction of the signal which lowers its strength. Another cause of poor network is if something is obstructing the network between the phone and the router. Most probably, it will be the cover case you bought to prevent damage to the phone and especially if it is made of metal, it will hinder with the signal strength. Whether it is causing an issue in real or not is something that you need to check. For this, analyze the quality of the signal on Ookla Speedtest with the cover on the phone and then repeat the procedure without the cover. If it shows any change, you know the culprit. This will help you either try to opt for other methods if it didn’t work.

Tip #6 – Learning About WiFi Access Point

In simple language, the access point is something that allows the phone to access the internet from the signals received from a router. Use Wi-Fi Analyzer app on your device to check the access point and its strength. Note that this can have significant improvement over the quality of the network as most of the times, the phone will automatically connect to a signal access point by default even where there is a powerful access point with strong connection available. The app will analyze all the access point can describe the best point to select as default. The app also features a tool to check out the spot with the best Wi-Fi network and many such tools are available.

Tip #7 – Relocate The Router In The Right Spot

As I explained above, routers have a fixed ranger wherein it transmits signals. When it is obstructed why a wall or any other structure, the signal losses its strength and thereby if you are too far from the router, the signal will be poor. The way out of this problem is to analyze the spot where you can place the router to transmit signals around the house optimally. For this purposes, you can download ‘Wi-Fi FDTD Solver’ app from the Google Play store or from the internet. It will showcase the layout of your house and the representation of the signals around the house. This will enable you to tweak into its possible and set it at a perfect spot.

Tip #8- Check Out The Channel In-use

There are over 14 channels in the 2.4Ghz frequency band and over 23 channels in the 5.0Ghz band. Since the former is too clustered, it usually suffers from poor internet connectivity. On the flip side, the 5.0Ghz band is comparatively larger and can hold tens of millions of devices without clustering them. If you are using any of the band and discover a poor connection, it can be because of interference from the neighboring Wi-Fi users. Change the channel for a better quality of internet. To check the best channels available in the vicinity, you can download Wi-Fi Analyzer or Network Analyzer Lite that will automatically detect the channels with fewer users and high-quality connection so that you can switch to it.

Tip #9 – Prevent Your WiFi From Prying Neighbors

If you have observed a gradual decrease in the quality and speed of the Wi-Fi, there are chances that someone else is hoarding on the bandwidth. It can be your neighbor or a friend or relative who uses your Wi-Fi. There are more than one ways to the retrieve password from a device in which you or anyone has already unlock it. On the contrary, there are series of steps you can take to minimize and prevent such Wi-Fi thieves from accessing the service you paid for.

You can frame a proper strong password for your router consisting of letters, numbers, and special characters. A combination of these three variables will make a password strong and difficult to crack. Select WPA2 password on the router settings that will make it encrypted. It is more secure than other security protocols like WEP or WPA. Next is to hide the network from any other device. Yes, you can hide your SSID or network ID from the firmware settings on your device, usually accessible at the IP addresses like “192.168.0.0”, “192.168.0.1”, “192.168.1.0”, “192.168.1.1” or others. Search for the feature ‘Broadcast SSIB’ in the settings and untick it. This will hide the network from anyone near the range and the only way to access it will be by entering both SSID and the password. This actually doubles the protection, however, it takes efforts to constantly enter the SSID and password to get access to the internet.

Advertisement

Tip #10 – Hack The Firmware Settings

A router has a fixed range within which, it will transmit signals and it will weaken as and when obstacles come in the way. There is an excellent trick suggested by a popular website where you can install DD-WRT Firmware for your router. The new firmware is more powerful than the generic firmware available with routers. Moreover, there are plenty of features that you can enjoy with this firmware. It will boost the speed of the router up to 70 mW thus, giving a much broader range for an interception.

Tip #11 – Use WiFi Repeater

It is an adjoined tip to the previous method where you can use an old Wi-Fi router as a range extender. Of course, you can buy dedicated extender from shopping websites but if you can’t or don’t want to buy it, you can use the old router in your home as an extender. Simply plug in both the routers at distant places across the house and create two access points by plugging in Ethernet to both the routers. You DD-WRT firmware to properly calibrate and use the routers as a single system.

Read More:

  • Guide To Fix Bluboo Power Button Not Working Problem
  • How to solve the weak Wi-Fi issue on iPhone 8 plus
  • Redmi Note 5 WiFi Issues: Troubleshoot Fix and Guide
  • How to fix Wi-Fi connection issues on iPhone X